On your Android device:

Go to your settings page.
Select Wireless & Networks.
Go to Bluetooth, then to Bluetooth Settings.

On your Scanner:

You can click here to view and download
two barcodes that you can scan that will put
the KDC Scanner into pairing mode.

Or you can use the Scanners powerful
on board menu system to do it by:
Opening the menu by pressing both side buttons.
Scroll down to BT Config.
Click on Connect Device.
Select HID Normal.
Go down and select Save & Exit.
Go down and select Top Menu.
Go down to BT Service.
Select Pairing.

Now on your Droid

Scan for Devices
Select the Scanner when it shows up.


Back on the Scanner

Select Top Menu and then Exit Menu.
Congratulations! Now you are ready to start scanning barcodes!